Infrastructure/Ad-Hoc; Wireless Lan Security; Wep 64 And 128 Bit; Wpa2-Psk With Ccmp - Honeywell RP2 User Manual

Infrastructure/Ad-hoc

1. Open the NETira CT Printer Configuration Utility Tool and click on Tools -
2. Under Printer Information, click on WIFI.
3. Change (or confirm) the following parameter settings:
4. After updating the New Value column, ensure that the Include column
5. Allow 30 seconds for the printer to reset.

Wireless LAN Security

The printer can be configured to use several wireless LAN security protocols.

WEP 64 and 128 Bit

1. Open the NETira CT Printer Configuration Utility Tool and click on Tools -
2. Under Printer Information, click on WIFI.
3. Click on Static WEP.
4. Change (or confirm) the following parameter settings:
5. After updating the new values, ensure that the Include column checkbox is
6. Allow 30 seconds for the printer to reset.

WPA2-PSK with CCMP

1. Open the NETira CT Printer Configuration Utility Tool and click on Tools -
2. Under Printer Information, click on WIFI.
3. Click on WPA/WPA2.
22
Query Printer Configuration (or press CTRL-q) to query the printer.
• ESSID: Type the name of your access point (Default = Honeywell)
• Network Type: Infrastructure or Ad-hoc
checkbox is selected for the values, and click the Send button to send this
change to the printer.
Query Printer Configuration (or press CTRL-q) to query the printer.
• WEP Selected Key: Select the key number to use
• WEP AP authentication: If users share 40 bit, use 64 bit encryption.
If users share 128 bit, use 128 bit encryption.
• WEP Data Encryption: Enable WEP Data Encryption
• WEP Key #1-4: Enter the WEP keys used by your access point
selected for the values, and click the Send button to send this change to the
printer.
Query Printer Configuration (or press CTRL-q) to query the printer.
RP2/RP4 User Guide