Black Mark Labels - Honeywell RP2 User Manual

3. Click the Manual Media button.
4. When prompted for the media type, select Interlabel/Gap and click OK.
5. Load Stock
6. Load Special Backing Media
7. Remove Stock
If the calibration is not successful, repeat the procedure.

Black Mark Labels

Note: A special media with black marks is necessary to perform this calibration.
1. Open the NETira
2. In the Printer Information column, click on Sensor Calibration.
RP2/RP4 User Guide
a. Place the face of the media over the printer's sensor and close the door.
b. Click OK.
a. Peel the labels off the backing and place the backing over the printer's sen-
sor.
b. Close the door and click OK.
a. Remove all media from the printer and close the door.
b. Click OK.
™
CT Printer Configuration Utility Tool.
31