Figure 6-14 Liquid Repeatability Data; Figure 6-15 Liquid Application Problems - Siemens SITRANS F FS200 Utility Programming Manual

Utility Screens
Repeatability Graph Tab
Application Problems Tab
FS200 Programming Manual, 03/2020,
A5E02951525-AB
The [Repeatability Graph] tab provides performance data relative to the estimated
repeatability of your flowmeter over your specified flow range. Additionally, it provides
specifications for Reynolds number (Nr) transitional-flow start / end based on pipe
dimensions, viscosity and flow range. Nr data is useful in evaluating the potential for
measuring flow in transitional conditions.

Figure 6-14 Liquid Repeatability Data

If any of your entered application parameters conflict with performance capabilities of
the FS230 flowmeter an "Application Problem" message will appear at the bottom of
the screen; this will cause an additional tab to open [Application Problems] (See Figure
6-15 below). Click on the [Application problem] tab to view a description of the
conflict(s). If no conflicts are present the tab will not appear.
Figure 6-15 Liquid Application Problems Screen
31