Advertisement
1 Button Displays and Operating Instructions
1.1 Key Description
Name
Key
Function
Parameter
Edit
Setting
Parameter
Check And
Save
Parameter
Increase
Parameter
Decrease
Start
Back-Tacking
Selection
End
Back-Tacking
Selection
Mode Shift
Key
Auto
Function
Press this key to enter or exit function parameter edit mode.
For the content of the selected parameters check and save: after select parameter press
this key to check and modify operation, after modified parameter value press this key to
exit and save the parameter.
Parameter increase
Parameter decrease
Execution starting back seam B segment or execution starting back seam (A, B segment)
1 Execution starting back seam (A, B segment) 2 times.
If long press, can increase screen backlighting brightness.
Execution terminates back seam C segment or execution terminates back seam (C, D
segment) 1 Execution terminates back seam (C, D segment) 2 time.
If long press, can decrease screen backlighting brightness.
If click, shift to free sewing, constant stitch sewing, continuous back seam shortcuts and
multi-section set needle shortcuts.
1. under the free sewing mode: press this key no function.
2. Under the Constant-Stitch Sewing mode press this key: As the treadle is toed down, it
will automatic performs E,F or G,H section by section, after finished section stitches, it
will stop automatically.
When the treadle is toed down again, it will automatically execute next section stitches
of setting till finished trimming, wiper and so on action. The LED OFF indicate the
corresponding function is turn off.
3. If long press, can restore factory setting.
Indicate
11
Advertisement
