Linux Operating System - One Stop Systems PE3R Manual

5.2.2.2 How to check PCI cards
The picture below shows the PCI cards are detected.

5.2.3 Linux Operating System

You can check and verify if the OSS express card and expansion chassis are detected on Linux Operating System. This section is only applicable
to OSS PE3R expansion unit with Expresscard34.
ExpressCard34
5.2.3.1 How to check OSS device
You can use the following commands to check on OSS devices.
Type lspci –vvv | grep "PCI Bridge" command on the terminal window. See output below

The Texas Instruments PCI Express-to-PCI Bridge is the host card.

The Pericom PCI to PCI bridge is the expansion board (expansion chassis).
PE3R 3-Slot PCI Expansion| 46
One Stop Systems