Power On Computer; Operating The Expansion Unit - One Stop Systems PE3R Manual

2.11 Power on Computer

To effectively use your OSS chassis as part of your computer system, ensure that all the proper connections are made. Then power on your
computer.
NOTE: Before powering ON the computer, you must turn ON the OSS expansion chassis first. Failure to do so, the OSS expansion device and
the all third party PCI cards in the chassis will not be detected or recognized by the computer's Operating System.
Do not turn ON the OSS expansion after powering UP the host computer.

2.12 Operating the Expansion unit

1. MAGMA equipment should be connected to the earth with the means of power cord.
2. This equipment is not suitable for use in location where children likely to be present.
3. This equipment should be installed in restricted area, closed and ignition proven cabinet/shelter.
4. Equipment may be supplied by 100-240V, 50-60Hz network.
PE3R 3-Slot PCI Expansion| 21
One Stop Systems