Mac Os 10.2.X; Linux; How To Check Oss Device - One Stop Systems PE3R Manual

3.8

MAC OS 10.2.x

Click on the Devices tab. You should see a pci-bridge device listed under PCI as shown below:
Any PCI Cards you install in the expansion chassis will appear behind the pci-bridge device.
If any of these devices are not displayed as shown above, you should shut down your system (computer first, then the expansion chassis) and
reconnect the cables and the PCI expansion host card to ensure that you have a solid connection
3.9

Linux

3.9.1 How to check OSS device

You can use the following commands to check on OSS devices.
Type lspci –vvv | grep 'Texas\|Pericom' command on the terminal window. See output below.

The Texas Instruments PCI Express-to-PCI Bridge is the host card.

The Pericom PCI to PCI bridge is the expansion board (expansion chassis).
PE3R 3-Slot PCI Expansion| 31
One Stop Systems