Connect Power Cord; Connecting To Electrical Outlets - One Stop Systems PE3R Manual

2.7

Connect Power cord

Before connecting the power cord, check that the power supply's On/OFF switch is set to OFF position. The switch is located below the power
cord receptacle.

Plug: 15A 110-120V | Connector: 15A 110-120V. OSS only provides the 110-120V power cord.

User can also use 15A 220V-230V power cord / plug. Power Plug and Electrical outlets vary from country to country.
Turn power supply switch to ON position. Plug in power cord to the expansion chassis.
.
NOTE
If possible, plug all power cords from the OSS expansion chassis and your host computer into a shared power strip,
preferably one that has surge and noise suppression circuitry built into it.
2.8

Connecting to Electrical Outlets

It is highly recommend using a power surge. Be cautious, practice safe and correct methods when powering up your expansion unit. This
product is provided with a power supply that automatically adjusts to input voltages between 100 to 240 Vac. A U.S. and Canadian 125 V
power supply cord is provided with this product. If using this product outside of the U.S. or Canada, please use locally available power supply
cords.
PE3R 3-Slot PCI Expansion| 19
One Stop Systems