Configuring Lan Ipv6; Table 8-10 Lan Parameters - Nokia ONT Product Manual

Configure a XS-2426G-A indoor ONT
Network configuration

Configuring LAN IPv6

Table 8-10 LAN parameters

Field
Port Mode
All Ports to Bridge Mode
Port 1 - 4
IPv4 Address
Subnet Mask
DHCP enable
DHCP Start IP Address
DHCP End IP Address
DHCP Lease Time
Primary DNS
Secondary DNS
Static DHCP Entry
MAC Address
IPv4 Address
3
Click Save.
4
Configure the Static DHCP parameters.
5
Click Add.
You can click Delete to delete a Static DHCP MAC address or IPv4 address.
E
ND OF STEPS
8.18 Configuring LAN IPv6
1
Click Network LAN_IPv6 from the left pane in the 10G PON Home Gateway page. The LAN_
IPv6 page displays.
December 2020
Issue 1
Description
Select this checkbox to set all ports to Bridge mode.
Select the port mode for each port and click Save.
• Route Mode
• Bridge Mode
Enter the IPv4 address of the ONT.
Enter the subnet mask of the ONT.
Select this checkbox to enable DHCP.
Enter the starting DHCP IP address.
Enter the ending DHCP IP address.
Enter the DHCP lease time (in min).
Enter the primary DNS identifier.
Enter the secondary DNS identifier.
Enter the MAC address of the static DHCP
Enter the IPv4 address for the static DHCP
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA
Nokia ONT
99