Configure a XS-2426G-A indoor ONT
Configuring the Application
Configuring NTP
8.42
Configuring NTP
1
Click Application NTP from the left pane in the 10G PON Home Gateway page. The NTP
page displays.
Figure 8-41 NTP page
2
Configure the following parameters:
Table 8-36 NTP parameters
Field
Enable NTP Service
Current Time
Primary Time Server
Secondary Time Server
Third Time Server
Interval Time
Time Zone
142
Description
Select this checkbox to enable the NTP service.
Enter the current local date and time.
Select a time server from the list or select Custom settings and enter the address of the time server.
Select a time server from the list or select Custom settings and enter the address of the time server.
Select a time server from the list or select Custom settings and enter the address of the time server.
Enter the interval at which to get the time from the time server, in seconds.
Select the local time zone from the list.
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA
Nokia ONT
December 2020
Issue 1