Configure a XS-2426G-A indoor ONT
Network configuration
Configuring Upstream (US) Classifier
Figure 8-26 US Classifier page
6
Configure the following parameters:
At least one field must be selected to create a classifier. A maximum of four fields may be
selected to create a classifier; this includes the interface field.
Table 8-21 US Classifier parameters
Field
Interface
Source MAC
Destination MAC
Source IP
Destination IP
Source Port
Destination Port
Protocol
Priority
December 2020
Issue 1
Description
Select an interface from the list; for example, None, LAN, 2.4G SSID, or 5G SSID.
The option None indicates that all interfaces are selected.
Click to enter a source MAC address.
Click to enter a destination MAC address.
Click to enter a source IP address.
Click to enter a destination IP address.
Click to enter a source port.
Click to enter a destination port.
Click to enter a protocol.
Select a priority level from 1 to 8. The lower the number, the higher the priority. No more
than 1 classifier can be created with the same priority.
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA
Nokia ONT
119