Figure 6-1 Xs-2426G-A Ont Connections - Nokia ONT Product Manual

Install a XS-2426G-A indoor ONT
Procedure
1
Place the indoor ONT unit on a flat surface, such as a desk or shelf.
Note: The XS-2426G-A cannot be stacked with another ONT or with other equipment.
The ONT mounting requirements are:
•
•
•
2
Review the connection locations, as shown in
(p. 62).

Figure 6-1 XS-2426G-A ONT connections

Fiber optic
port
3
Connect the Ethernet cables to the RJ-45 ports.
4
Route the POTS cable directly to the RJ-11 port as per local practices.
5
December 2020
Issue 1
allow a minimum 100 mm clearance above the top cover
allow a minimum 50 mm clearance from the side vents
do not place any heat source directly above the top cover or below the bottom cover
USB TEL1
USB POTS port
port (RJ-11)
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA
Figure 6-1, "XS-2426G-A ONT connections"
WPS LED
TEL2 LAN1 LAN2 LAN3 LAN4 POWER WLAN RESET ON/OFF
Ethernet Power Wi-Fi
ports (4) security/
(RJ-45) on/off buttons
Nokia ONT
On/off
button
Reset
button
36553
63