Table 5-4 Xs-2426G-A Indoor Ont Physical Connections; Figure 5-3 Xs-2426G-A Indoor Ont With Fiber Optic Connector - Nokia ONT Product Manual

XS-2426G-A unit data sheet
XS-2426G-A interfaces and interface capacity
Figure 5-3, "XS-2426G-A indoor ONT with fiber optic connector" (p. 48)
indoor ONT with a fiber optic connector.

Figure 5-3 XS-2426G-A indoor ONT with fiber optic connector

Table 5-4, "XS-2426G-A indoor ONT physical connections" (p. 49)
connections for XS-2426G-A indoor ONTs.

Table 5-4 XS-2426G-A indoor ONT physical connections

1
Connection Print Letters
POTS port TEL1 and TEL2
Ethernet ports LAN1 to LAN4
Power input POWER
Reset button RESET
WLAN button WLAN
WPS button WPS
LED button LED
December 2020
Issue 1
USB TEL1 TEL2 LAN1 LAN2 LAN3 LAN4
Description
This connection is provided through an RJ-11 port. One POTS connection is supported.The
POTS port supports voice services.
This connection is provided through Ethernet RJ-45 connectors. Up to four 10/100/1000
Base-T Ethernet interfaces are supported.The Ethernet ports can support both data and
in-band video services on all four interfaces.
This connection is provided through the power connector. A power cable fitted with a barrel
connector is used to make the connection.
Pressing the Reset button for less than 10 seconds reboots the ONT; pressing the Reset
button for 10 seconds resets the ONT to the factory defaults, except for the LOID and SLID.
Wi-Fi service is compliant with IEEE 802.11 standards and is enabled and disabled using the
WLAN button.
The Wi-Fi Protected Setup (WPS) button enables and disables the WPS.
The LED button turns the LED indicators on or off.
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA
shows the XS-2426G-A
WPS LED
WLAN RESET ON/OFF
POWER
describes the physical
Nokia ONT
36552
49