Figure 7-1 Xs-2426G-A Indoor Ont Connections - Nokia ONT Product Manual

Replace a XS-2426G-A indoor ONT
Procedure
1
Deactivate the ONT services at the P-OLT.
If you are using the SLID feature, this step is not required. The ONT and the services can
remain in service (IS).
a. Use the RTRV-ONT command to verify the ONT status and th associated services. Record
the serial number or the SLID of the ONT displayed in the command output.
Example:
RTRV-ONT::ONT-1-1-1-1-1;
b. If the ONT is in service, place the ONT in OOS state.
Example:
ED-ONT::ONT-1-1-1-1-1;
2
If used, disable the Wi-Fi service by pressing the WLAN button; see
indoor ONT connections" (p. 68)

Figure 7-1 XS-2426G-A indoor ONT connections

Fiber optic
port
December 2020
Issue 1
for the location of the WLAN button.
USB TEL1 TEL2 LAN1 LAN2
USB POTS port Ethernet
port (RJ-11) ports (4)
(RJ-45)
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA
WPS LED
LAN3 LAN4 WLAN RESET ON/OFF
POWER
Reset
button
Power Wi-Fi
security/
on/off buttons
Nokia ONT
Figure 7-1, "XS-2426G-A
On/off
button
36553
69