Configure a XS-2426G-A indoor ONT
Network configuration
Configuring WAN
Figure 8-16 WAN page
2
Configure the following parameters:
Table 8-12 WAN parameters
Field
WAN Connection List
Connection Type
IP mode
Enable/Disable
NAT
Service
Enable VLAN
VLAN ID
102
Description
Select a WAN connection from the list to set the connection parameters.
Select a connection type: IPoE or PPPoE.
Select an IP mode from the list: IPv4 or IPv6.
Select this checkbox to enable the WAN connection.
Select this checkbox to enable NAT.
Select the checkboxes to enable the following service types for this connection.
• VOIP
• TR-069
• INTERNET
• IPTV
Select this checkbox to enable VLAN.
Enter the VLAN ID.
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA
Nokia ONT
December 2020
Issue 1