Configure a XS-2426G-A indoor ONT
Configuring the Application
Configuring DDNS
Table 8-34 Port Triggering parameters (continued)
Field
Triggering Port
Expire Time
Open Protocol
Trigger Protocol
Enable Triggering
WAN Connection List
3
Click Add.
E
ND OF STEPS
8.41
Configuring DDNS
1
Click Application DDNS from the left pane in the 10G PON Home Gateway page. The DDNS
page displays.
140
Description
Enter the triggering port range.
Enter the expiration time in seconds.
Select the open port protocol from the list:
• TCP
• UDP
• TCP/UDP
Select the triggering port protocol from the list:
• TCP
• UDP
• TCP/UDP
Select this checkbox to enable port triggering.
Select a WAN connection from the list.
Note: Only active devices are shown on this list.
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA
Nokia ONT
December 2020
Issue 1