Setting Image And Movie File Display Conditions And Operation Mode - Epson PowerLite 1725 Operation Manual

Setting Image and Movie File Display Conditions and Operation Mode

You can set the display conditions and operation mode for playing
back image or movie files as a Slide show in PC Free.
Procedure
A
Use the [ ] buttons to position the cursor on the
folder where display conditions are to be set, then
press the [Esc] button.
B
Select "Option" in the displayed menu and press the
[Enter] button.
C
Make your desired settings on the displayed option
screen.
Enable settings by positioning the cursor on the target item and
pressing the [Enter] button.
Details of the items are given below.
Display order You can set the order of the files to be displayed.
You can select sorting of the files into either file
name order or revision date order.
Continuous You can determine whether to repeat the Slide
Play
show.
Screen You can set the time for a single file to be displayed
switching time
when running a Slide show. You can set a time from
1 to 60 seconds. Or if you don't want the files to
change automatically during the Slide show, select
"No". If you select "No", press the [Enter] button
on the remote control to continue to the next file
during the Slide show.
Effect This sets the transition effects between files.
D
Use the [ ] buttons to position the cursor over
"OK" and press [Enter].
The settings are applied.
If you do not want to apply the settings, position the cursor on
"Cancel" and press the [Enter] button.
64