Nexcom Peak 550 User Manual page 48

Peak 550 User's Guide
DMA-0 assigned
to
DMA-1 assigned
to
DMA-3 assigned
to
DMA-5 assigned
to
DMA-6 assigned
to
DMA-7 assigned
to
Resource Controlled by
The Award Plug and Play BIOS has the capacity to automatically configure all of
the boot and Plug and Play compatible devices. However, this capability means
absolutely nothing unless you are using a Plug and Play operating system such as
®
Windows 95.
Choices are Auto and Manual (default).
Reset Configuration Data
This item allows you to determine reset the configuration data or not.
Choices are Enabled and Disabled (default).
IRQ/DMA Assigned To
This item allows you to d etermine the IRQ / DMA assigned to the ISA bus and is
not available to any PCI slot. (Legacy ISA) or PnP for both ISA and PCI.
Choices are Legacy ISA and PCI/ISA PnP.
PCI IRQ Activated by
This sets the method by which the PCI bus recognizes that an IRQ service is being
requested by a device. Under all circumstances, you should retain the default
configuration unless advised otherwise by your system's manufacturer.
Choices are Level (default) and Edge.
BIOS Setup
: PCI/ISA
PnP
: PCI/ISA
PnP
: PCI/ISA ESC : Quit
PnP
: PCI/ISA F1 : Help
PnP
: PCI/ISA F5 : Old Values
PnP
: PCI/ISA F6 : Load BIOS Defaults
PnP
F7 : Load Setup Defaults
↑ ↓ → ←: Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color
4- 26