Nexcom Peak 550 User Manual page 44

Peak 550 User's Guide
E. Switch Function
F. Standby Mode
(*) Remark 1
G. Suspend Mode
(*) Remark 1
BIOS Setup
1. Break The External Suspend Switch is "Break"
2. Wake The External Suspend Switch is "Wake"
2. 1 Min Defines the continuous idle time before the
2 Min system entering DOZE mode.
4 Min
6 Min if any item defined in (J) is enabled & active,
8 Min DOZE timer will be reloaded
10 Min
20 Min
30 Min
40 Min
1 Hr
Note: Normally,STANDBY
1. Disable System will never enter STANDBY mode
2. 1 Min Defines the continuous idle time before the
2 Min system entering STANDBY mode.
4 Min
6 Min if any item defined in (J) is enabled & active,
8 Min STANDBY timer will be reloaded
10 Min
20 Min
30 Min
40 Min
1 Hr
Note: Normally,STANDBY
1. Disable System will never enter SUSPEND mode
2. 1 Min Defines the continuous idle time before the
2 Min system entering SUSPEND mode.
4 Min
6 Min if any item defined in (J) is enabled & active,
8 Min SUSPEND timer will be reloaded
10 Min
20 Min
30 Min
40 Min
1 Hr
Note: Normally,SUSPEND
mode puts the system
into low speed or 8
MHz, screen may be
off depend on (E)
mode puts the system
into low speed or 8
MHz, screen may be
off depend on (E)
4- 22