Chipset Features Setup - Nexcom Peak 550 User Manual

Peak 550 User's Guide

Chipset features setup

This setup page includes all the items of chipset special features. See Page 4-16 for
details.
Power Management setup
This category determines how much power consumption for system after selecting
below items. Default value is Disable. See Page 4-17 to Page 4-20 for details.
PNP/PCI CONFIGURATION
This category specifies the assignment of all the IRQ's and DMA's
See Page 4-21 to Page 4-22 for details.
Load BIOS defaults
BIOS defaults indicates the most appropriate value of the system parameter which
the system would be in minimum performance. The OEM manufacturer may
change the defaults through MODBIN before the binary image burn into the ROM.
Load setup defaults
Chipset defaults indicates the values required by the system for the maximum
performance. The OEM manufacturer may change to defaults through MODBIN
before the binary image burn into the ROM.
Integrated Peripherals
This category allows you to set up all the on board I/O controllers like IDE, SCSI,
FDC, etc,. See Page 4-23 to Page 4-25
Supervisor/User Password
Change, set, or disable password of supervisor or user. It allows you to limit
access to the system and Setup, or just to Setup. See Page 4-26 for details.
BIOS Setup 4- 6