Table of Contents
Advertisement
FCTP-FT1602
Integrated Safety System
Ford Transit - Non-Tow Mirrors
Routing the Camera Extension Cables
Step 1
Route camera extension harnesses along
the inside lower portion of the dash and up
to the radio cavity.
Connect the T-harness to the radio
vehicle harness and the other side to the
radio.
Connect the RCAs from the
MCI-FD22-HAR to the RCAs of
the MB11-VS41-HAR.
Connect the camera extension cables to
the left and right camera input on the
MB11-VS41-HAR. Use proper orientation
on the connections as to not damage the
cameras.
The toggle switch is for front camera use.
Refer to the P-MCI-FD22 guide.
Step 2
There is a small opening between the AC
vent and the radio where the module will fit
without interfering with the front dash panel
and the AC vents.
Illustrations are typical and may not match exact vehicle details
tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast)
PLEASE NOTE
If adding a front camera refer to the
P-MCI-FD22 guide
email - support@aampglobal.com (US)
email - technical.eu@aampglobal.com (Europe)
17
Advertisement
Table of Contents
