Table of Contents
Advertisement
Mounting the Camera Mirror Caps - (cont'd)
Step 2
Ensure all 6 pressure snaps are locked in place.
Reinstall the 2 x T10 torx screws to secure the turn
signal or blank in place.
Reinstall the mirror glass by snapping them back on
the mounts.
Use even, flat pressure to lock the mirror glass into
place.
Mount the mirror on the vehicle leaving the camera
cable hanging out from behind the foam.
Routing the Camera Cables
Step 1
Remove the grommet located between the
mirror and the sail piece. Cut an X in the
grommet to route the camera cable through.
Replace the sail once the grommet is
reinstalled with the camera cable inserted.
Illustrations are typical and may not match exact vehicle details
email - support@aampglobal.com (US)
16
tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast)
email - technical.eu@aampglobal.com (Europe)
Integrated Safety System
Ford Transit - Non-Tow Mirrors
FCTP-FT1602
X
Advertisement
Table of Contents
