Table of Contents
Advertisement
Mounting the Camera to the Mirror Caps
Step 1
To assemble camera into the mirror caps,
align the flat edge on bottom of the camera
to mate with the flat edge on the mirror cap.
Step 2
Push until camera snaps into place.
PLEASE NOTE
The camera will fit very snugly when being
inserted.
Routing Camera Harnesses
Step 1
Route the camera cable along the turn signal
wire. (If equipped)
Route the camera cable down through the
large hinge. There is a large opening the cable
will come through.
PLEASE NOTE
Leave extra cable inside the mirror
to allow the mirror to move.
Illustrations are typical and may not match exact vehicle details
email - support@aampglobal.com (US)
14
tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast)
email - technical.eu@aampglobal.com (Europe)
Integrated Safety System
Ford Transit - Non-Tow Mirrors
FCTP-FT1602
Advertisement
Table of Contents
