Table of Contents
Advertisement
Camera
Pattern
Save and retrieve a motion pat-
tern.
Patrol
Save and retrieve patrols.
Saving and retrieving presets
1. Use the arrow keys to navigate the camera to the
desired image section.
2. Save the preset position by assigning a code
(e.g. 1, 2... 10) and then selecting the "Set" but-
ton.
3. To retrieve the preset, enter your code and click
on "Retrieve".
Saving and retrieving a pattern
1. Click on "Start" to start recording.
2. Use the arrow keys to navigate the camera to the
desired image sections and positions.
3. Click on "Stop" to save the recording.
Setting up and calling up patrols
1. Create several presets to use for the patrol
2. Click on "Set" to select a preset and set the dwell
time and speed.
3. Add more presets to set up the required patrol.
4. Click on "Retrieve" to start the patrol.
Motion
Motion detection is controlled solely using the motion in-
formation on the recorder, which has been detected by
the camera.
If a live image from the camera is displayed in this dia-
logue, you can configure the camera's motion screens di-
rectly.
Note
The displayed settings for motion detection are
basic settings. In the camera's web interface, de-
tailed settings may be available.
If no live image from the camera is displayed in this dia-
logue, all settings for motion screens and sensitivity must
be set directly in the camera's web interface. To set up
motion detection, proceed as follows:
1. Select the camera channel to be processed un-
der "Camera".
2. Tick the "Enable Motion Detection" box and de-
fine any other optional parameters under "Set-
tings".
3. On a PC, open the web interface for the camera
you have selected and adjust the advanced set-
tings for the motion mask, threshold and sensitiv-
ity.
4. Repeat the process for any additional cameras.
5. Click on Apply to save the settings.
6. If you wish to record based on motion detection,
switch to the "Record" menu item and select the
relevant cameras under "Schedule". Here you
can configure the schedule using the "Motion"
event in order to set up a motion-detection-based
recording.
Note
To record with the aid of motion detection, you
must set up the schedule under Record.
Note
The sensitivity settings for motion detection need
to be adjusted on the camera web interface.
7.
Click on Apply to save the settings.
38
Advertisement
Table of Contents
