Table of Contents
Advertisement
NAT tab
Parameter
Setting
Enable UPnP™
Tick the box to enable visibility on an
IP network. When this function is acti-
vated, port forwarding is automati-
cally entered in the router for all net-
work ports (provided that UPnP is en-
abled in the router).
If UPnP is enabled, the network ports
configured by UPnP are transferred
to the ABUS server (provided that
ABUS DDNS is enabled).
Mapping Type
For "manual" settings, the network
ports can be manually defined using
the "Edit" button.
For "auto" settings, the recorder
checks for free network ports on the
router and defines the port numbers
in a random pattern.
Confirm the settings by clicking on Apply and exit the
menu by clicking on Back.
SNMP tab
Parameter
Setting
Enable SNMP
Select the checkbox to create a con-
nection to SNMP software
SNMP Version
The version of the SNMP system
SNMP Port
Enter the SNMP port
(default: 161)
Read Community Enter the "Key" according to the set-
tings of your SNMP software.
Write Community Enter the "Key" according to the set-
tings of your SNMP software.
Trap Address
Enter the IP address for the SNMP
manager
Trap Port
Enter the trap port (default: 162)
Note
29
SNMP is used for monitoring the device status.
For this you need suitable SNMP software.
Confirm the settings by clicking on Apply and exit the
menu by clicking on Back.
More Settings tab
Parameter
Setting
Alarm Host IP
Network address of the CMS station
Alarm Host Port
Port for your CMS station
Server Port
Port for data communication (default:
8000)
HTTP Port
Port for the web server (default: 80)
Multicast IP
You can enter the multicast IP here
too in order to minimise traffic. The IP
address must correspond to the one
in the video surveillance software.
RTSP Port
Enter the RTSP port
(Default: 554).
Enable high-
Tick the box to enable high-speed
speed download
download
Note
Server port 8000 and HTTP port 80 are the stand-
ard ports for remote clients and remote internet
browser access.
Configuration
Advertisement
Table of Contents
