Advanced Settings - Abus TVVR35002 User Manual

HDD
NetHDD
Choose from eight NetHDDs.
Type
NAS: For this setting, your net-
work storage must support the
NFS file system.
IP SAN: For this setting, your net-
work storage must support the
iSCSI protocol.
IP address
Enter the network storage IP ad-
dress.
NetHDD Directory
Enter the storage path or iSCSI
target.
Click on Search to identify the network storage and then
click on OK to add the NetHDD.
The NetHDD must be initialised before use.

Advanced settings

Here you can define the settings for the storage mode.
Mode: Quota
In this mode, video data is divided between the total
number of data storage devices connected and written
onto them.
Camera
Selection of the camera channel
to be processed
Used Record Ca-
Video storage space currently in
pacity
use on the linked data storage
devices.
Used Picture Ca-
Picture storage space currently
pacity
in use on the linked data storage
devices.
HDD Capacity
Total available hard disk drive
(GB)
capacity (in GB).
Specify the maximum video re-
Max. Record Ca-
cording size on the linked data
pacity (GB)
storage devices for each camera.
Specify the maximum picture re-
Max. Picture Ca-
cording size on the linked data
pacity (GB)
storage devices for each camera.
When this function is activated,
Enable HDD
idle hard disk drives go into
Sleeping
standby mode.
1. Use Copy to specify if the setting is to be applied to
all cameras.
2. Confirm the settings by clicking on Apply and exit the
menu by clicking on OK.
The group of hard disk drives will be saved.
3. Click on Apply and confirm the reboot in the next
window by clicking on OK.
Mode: Group
In this mode, video data can be specifically (and also re-
dundantly) stored on selected data storage devices.
Parameter
Setting
Record on HDD
Select HDD group.
Group
IP Camera
Select which cameras should be
stored in the group currently se-
lected.
When this function is activated,
Enable HDD
idle hard disk drives go into
Sleeping
standby mode.
The HDD groups are configured in the General menu. To
do this, click on to open the HDD group settings.
48