Fault Rectification; Disposal; Notes On Ec Directives For Waste Electrical And Electronic Equipment; Notes On Rohs Eu Directive - Abus TVVR35002 User Manual

Fault rectification

Fault rectification
Before contacting the Service department, read the following information to determine the possible cause of any fault.
Fault
No power
No picture
No sound
Hard disk drive not functioning Connection cable is not connected properly
USB connection not functioning Device is not supported
Network access not possible.
Recording is not possible
Sudden switch-off

Disposal

Notes on EC directives for waste electrical
and electronic equipment
For the protection of the environment, at the end of its
useful lifespan, the device may not be disposed of in
household waste. Disposal can be carried out at suitable
national collection points. Obey local regulations when
disposing of material.
Dispose of the device in accordance with EU
Directive 2011/65/EU - WEEE (Waste Electrical
and Electronic Equipment). If you have any
questions, please contact the municipal author-
ity responsible for disposal. Information on col-
lection points for waste equipment can be ob-
tained from the local or district authorities, local
waste disposal companies or the dealer.

Notes on RoHS EU Directive

The device complies with the RoHS directive.
63
Cause
Power cable not connected
Power switch at OFF
No power supplied from socket
The screen is not set to receive
Video cable is not connected properly
The connected monitor is switched off
Audio cable is not connected properly
Devices connected via audio cable are not
switched on
Audio connecting cable is damaged
Hard disk drive faulty or incompatible with the
system
USB Hub was used
Network cable connection loose
Network settings (DCHP, IP address etc.) in-
correct
No HDD, or HDD not initialised
The internal temperature of the device is too
high
Solution:
Connect the power cable properly to the
socket
Set power switch to ON
If necessary, use another device at the
socket
Set correct video input mode, until an image
is received from the recorder
Connect the video cable properly
Switch on monitor
Connect the audio cable properly
Devices connected via the audio cable are
not switched on
Replace cable
Connect the cable properly
Replace the hard disk drive with a recom-
mended hard disk drive
Connect correct USB medium, USB 2.0
Connect USB medium directly
Insert network cable.
Check and if necessary correct network con-
figuration, see page 27.
Install and initialise hard disk drive
Clean the device and/or remove any objects
impeding the ventilation
Compliance with the RoHS directive means that the prod-
uct or component contains none of the following sub-
stances in higher concentrations than the highest con-
centrations in homogeneous materials, unless the sub-
stance is part of an application that is excluded from the
RoHS Directive:
a) 0.1 % lead (by weight)
b) Mercury
c) Hexavalent chromium
d) Polybrominated biphenyl (PBB) and polybrominated
diphenyl ether
e) 0.01 % cadmium (by weight).