Table of Contents
Advertisement
User
Warning
Note down the admin password.
The preset password is:
In user management, you can add new users, delete us-
ers, and amend existing settings.
1.
To add a new user, select Add.
Parameter
Setting
User name
Unique identification
Password
Access code for the device, for the
purpose of device management.
Note: change your passwords regu-
larly, using a combination of letters and
numbers etc. and note them down to
be stored in a safe place.
Confirm
Enter the access code again for secu-
rity.
Level
IMPORTANT:
More rights can be set on the Opera-
tor level than on the Guest level.
33
1 2 3 4 5
"
".
User's MAC
MAC address of the network adapter
Address
of the PC used by the corresponding
user.
Note:
This limits access to the PC, for which
the MAC address has been entered
here.
2.
Enter the name and password and confirm the pass-
word in the field below.
3.
Select the level and enter the MAC address.
3. Confirm the settings by clicking on OK.
Warning
Follow the instructions below on assigning access
rights.
Setting permissions
Control the access permission of the user by clicking on
the "Permission" icon. Only the access data of users
added manually can be changed:
Note
The user can adjust the settings locally, i.e. on the
device, or change the parameters.
The user can access the device via the network
connection.
Settings relating to permission to access individual
cameras (via the network or locally) can be found
in the Camera tab.
Parameter
Setting
Configuration
Advertisement
Table of Contents
