Camera Name; Motion Sensor - Abus TV8239 Installation Manual

Camera name

Under "TITLE SETUP", you can define names for the cameras.
Set "ON" following "CH1" to "CH4" to display the camera name on the screen.
Define the camera names using the [+] and [–] keys. 65 characters are available as follows:
0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z
： ．
CHARACTER COLOR: Sets the colour of the displayed camera name. Possible colours: White, yellow, blue-
green, green, magenta, red, blue, black, grey

Motion sensor

Under "MOTION SETUP", you can set the motion sensors of the cameras.
POWER ON MOTION AUTO OFF/ON: If you set this function to OFF and you disconnect the device from
the power supply, all movements are ignored when the Quad is restarted. If you select "ON", the sensor
triggers immediately at restart if the motion sensor of one or more cameras is active.
SENS (sensitivity): Sets the sensitivity of the motion sensor. Possible values: from 10 (low) to 99 (very high).
MD. NUM (number of pictures for motion detection): Specifies how many pictures are used for motion
detection (range: 04 to 45).
Example:
MD is set to 04. To trigger the motion sensor, 4 pictures are used as a reference.
.... TITLE SETUP ....
CH1: ON CAMERA01
CH2: ON CAMERA02
CH3: ON CAMERA03
CH4: ON CAMERA04
CHARACTER COLOR: WHITE
Fig. 4
MOTION SETUP
POWER ON MOTION AUTO
SENS MD.NUM RE DET
CH1: 70 03 64 OFF AREA
CH2: 70 03 64 OFF AREA
CH3: 70 03 64 OFF AREA
CH4: 70 03 64 OFF AREA
BUZZER ALARM TIME: 3 SEC
RELAY OUT TIMER:
FREEZE HOLD TIMER: 30 SEC
Fig. 5
27
OFF
8 SEC