Table of Contents
Advertisement
Starting the device
Attention
The device may only be connected to a mains
voltage supply as specified on the type plate.
For security, use an uninterruptable power supply
UPS.
When the device is connected to the power supply, it
starts up automatically and the LED status bar glows.
1.
During the start-up procedure, the device carries out
a self-test.
2.
Finally, the setup wizard appears. End this, to go to
live view.
Switching off the device, locking, rebooting
In the main menu, click on Shutdown. The overview ap-
pears.
1.
To switch off, select the Shutdown option and con-
firm the query with Yes. The device is switched off.
Do not press any key during the switch off pro-
cedure.
Now pull out the plug of the power supply unit.
2.
To lock the system, select the left hand symbol Log-
out. The user interface is locked. To reach the
menu, a password must be entered.
3.
To reboot, select the right hand symbol Reboot. The
device carries out a reboot.
Switching on the device
Plug in the power supply unit to start the device.
9
Introduction
Advertisement
Table of Contents
