Installing Deviceinstaller; Assigning An Ip Address - Lantronix UDS 1100 User Manual

This chapter covers the steps for getting the UDS1100 device server online and
for viewing its current configuration.
Note:
by Lantronix that discovers, configures, upgrades, and manages
Lantronix Device Servers. It can be downloaded from the Lantronix
website at www.lantronix.com/support/downloads.
For instructions on using DeviceInstaller to configure the IP address and
related settings or for more advanced features, see the DeviceInstaller
Online Help.

Installing DeviceInstaller

To install DeviceInstaller:
Download the latest version of DeviceInstaller from
1.
http://www.lantronix.com/support/downloads.
Run the executable to start the installation process.
2.
Respond to the installation wizard prompts. (If prompted to select an
3.
installation type, select Typical).

Assigning an IP Address

The unit's IP address must be configured before it can work correctly on a
network. The unit's IP address is normally set to 0.0.0.0 at the factory. The
hardware address is on the product label. The unit is DHCP enabled as the
default.
To assign an IP address manually:
Click StartPrograms  LantronixDeviceInstaller 4.4
1.
DeviceInstaller. If your PC has more than one network adapter, a
message displays. Select an adapter and click OK.
Note:
an IP address), click the Search icon
list of Lantronix device servers on the local network.
Click the Assign IP icon
2.
If prompted, enter the hardware address (on the product label) and click
3.
Next.
Select Assign a specific IP address and click Next.
4.
Enter the IP address. The Subnet mask displays automatically based on the
5.
IP address; if desired, you may change it. On a local network, you can leave
the Default gateway blank (all zeros). Click Next.
UDS1100 Device Server User Guide
The DeviceInstaller™application is a free utility program provided
If the unit already has an IP address (e.g., DHCP has assigned
and select the unit from the
.
4: Using DeviceInstaller
18