Safety Guidelines; Safety Precautions; Electricity Utilization Safety; Transportation Safety - Honeywell X-618 Installation Manual

Safety Guidelines

Safety guideline
Safety guideline

Safety Precautions

Please carefully read and observe the following precautions before installing, operating or using
this product.

Electricity Utilization Safety


Local electrical safety regulations must be observed for product installation and operation.

The Company shall not be liable for fire or electric shock accidents caused by incorrect
installation and mistake.

Transportation Safety


The product shall be protected against impact, violent vibration or liquid erosion during
transportation, storage and installation.

Environmental Requirements


Do not install the product within the environment of extreme temperature or dust and
mechanical vibration.

This equipment shall be well ventilated and protected against dust, moisture, direct sunshine
and violent during the use. It shall be kept away from radiating objects or heat sources and
well ventilated. The optimum working environment temperature is 5-28º C and relative humidity
<95%. If the equipment is in operation for a long time and ambient temperature is too high, it is
recommended that effective measures should be taken to reduce temperature.

Requirements on grid power supply voltage by the equipment: AC 100V~ 220V (-15% ~ +10%)
50 ~ 60 Hz or DC 12V/24V. In case of too high, too low voltage or that fluctuating greatly, it is
recommended that AC regulated power supply should be installed.
Danger
This sign reminds users of "dangerous voltage" on the product.
Caution
This sign reminds users of important instructions attached to the product.
In order to prevent electric shock, this equipment plug shall not be used
as conductor to extend power supply line.
Do not block the equipment's ventilation opening or put other equipment
on it.
Protect this equipment against rainwater or moisture so as to avoid fire or
electric shock.
i