Honeywell X-618 Installation Manual page 19

Public address and voice alarm system

Hide thumbs Also See for X-618:

Table of Contents

Insert the power amplifier audio output wiring terminal of the installed audio output cable

into the DA audio output port.

Figure 12 Schematic Diagram of the Audio Output Wiring Terminal Installation

Insert the power amplifier input wiring terminal of the installed audio output cable into the

DCS PA audio input port.

Figure 13 Schematic Diagram of X-DCS3000 100V Audio Input Wiring Terminal Installation

Carefully check the input and output cables of DCS that connect to amplifier, ensuring the

channels are correct.

Cover the power amplifier terminal with the protective terminal cover and tighten the

screws. This same operation applies to the DCS terminal and related protective cover.

Table of Contents