Controls And Features; Front View - JVC DT-V1710CG Instructions Manual

Controls and Features

7Front View

1
1 Tally lamp
This lamp is controlled by the tally function of
the MAKE/TRIGGER terminal.
☞ "How to Use the MAKE/TRIGGER Terminal" on page
21
• You can set the lamp color to red or green.
☞ "TALLY SELECT" on page 16, "How to Use the
External Control" on pages 21 and 22
2 PHASE adjustment knob
Adjusts the picture hue.
3 CHROMA adjustment knob
Adjusts the picture color density.
4 BRIGHT adjustment knob
Adjusts the picture brightness.
5 CONTRAST adjustment knob
Adjusts the picture contrast.
6 VOLUME button
Adjusts the speaker volume.
4
2 3 4 5
6
7 8 11 12 13 14
9 6 10 15 16 17
7 MUTING button
Pressing this button mutes the output sound.
• To cancel "MUTING ON" (no sound), press MUTING
button again, or press the VOLUME "–" or "+" button.
NOTE:
• When a menu or setting item is displayed on the
screen, this button functions as a control button for the
menu screen.
8 EMBEDDED AUDIO channel switch button
Press or
VOLUME button (while the VOLUME bar is
displayed on the screen) to switch the audio
channel.
NOTES:
• Valid when an input card compliant with EMBEDDED
AUDIO is installed. If the input card has the DIP switch
for audio input type selection (analog audio or
EMBEDDED AUDIO), select EMBEDDED AUDIO to
use these buttons.
• Audio channels can be selected from 1 channel to 8
channel.
• Set the group of the selectable audio channels.
☞ "E. AUDIO GROUP" on page 17
9 Menu select buttons ( / / / )
Selects or adjusts menu items while a menu
screen is displayed.
☞ "Basic Menu Operations" on page 11
p MENU button
Displays the MAIN MENU.
☞ "Basic Menu Operations" on page 11
NOTE:
• To display SET-UP MENU, Press the
pressing the
19
18
button after pressing the
button while
button on the front panel.
20