Table of Contents
Advertisement
Quick Links
MULTI-FORMAT MONITOR
DT-V1700CG
For Customer Use:
Enter below the Serial No. which is located on the rear of
the cabinet. Retain this information for future reference.
:
Model No.
DT-V1700CG
:
Serial No.
INSTRUCTIONS
UNDER
DEGAUSS
SCAN
MENU
BLUE
VOLUME
CHECK
The illustration above shows the DT-V1700CG with provided
wide mask attached.
PULSE
COLOR
CROSS
OFF
POWER
SLOT 1
SLOT 2
SLOT 3
A
B
C
D
E
F
ASPECT
AREA
INPUT SELECT
MARKER
Advertisement
Table of Contents
Related Manuals for JVC V1700CG
Summary of Contents for JVC V1700CG
- Page 1 Retain this information for future reference. Model No. DT-V1700CG Serial No. INSTRUCTIONS UNDER PULSE COLOR DEGAUSS SCAN CROSS SLOT 1 MENU BLUE ASPECT AREA VOLUME CHECK MARKER The illustration above shows the DT-V1700CG with provided wide mask attached. POWER SLOT 2 SLOT 3 INPUT SELECT...
-
Page 2: Safety Precautions
● Video or audio signals cannot be input to this monitor without optional input cards. ● In these instructions, all explanations (except where noted) refer to the DT-V1700CG with input cards installed. SCREEN BURN ● It is not recommended to keep a certain still image displayed on screen for a long time as well as displaying extremely bright images on screen. -
Page 3: Table Of Contents
POWER CONNECTION The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 230 V (For European countries or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure Safety and EMC regulations of each countries. -
Page 4: Controls And Features
CONTROLS AND FEATURES FRONT VIEW <Front Panel> UNDER PULSE COLOR DEGAUSS SCAN CROSS SLOT 1 SLOT 2 SLOT 3 POWER MENU BLUE ASPECT AREA INPUT SELECT VOLUME CHECK MARKER Tally lamp Lights when the tally control signal is ON. The tally control signal is input through the MAKE remote terminal. -
Page 5: Rear Panel
REAR/SIDE VIEW <Rear Panel> REMOTE MAKE RS-232C MAIN POWER COLOR OFF button/lamp Press the COLOR OFF button. The button lights and the screen becomes monochrome. When the COLOR OFF button is pressed while lit, the light goes off and the normal screen is restored. -
Page 6: Controls And Features (Input Card: Optional)
CONTROLS AND FEATURES (INPUT CARD: OPTIONAL) COMPONENT/RGB INPUT CARD (OPTIONAL: IF-C01COMG) /B-Y /B-Y HD/C AUDIO Compatible signal formats: 480/60i, 576/50i, 480/50p, 480/60p, 720/60p, 1035/60i, 1080/50i, 1080/60i VIDEO INPUT CARD (OPTIONAL: IF-C01PNG) VIDEO 1 VIDEO 2 Y/C IN EXT.SYNC AUDIO 1 AUDIO 2 Compatible signal formats: NTSC (3.58 MHz), PAL (4.43 MHz), black-and-white... - Page 7 SDI INPUT CARD (OPTIONAL: IF-C01SDG) SWITCHED SDI 1 SDI 2 AUDIO 1 AUDIO 2 Compatible signal formats: 480/60i, 480/50i HD SDI INPUT CARD (OPTIONAL: IF-C01HSDG) SWITCHED HD SDI 1 HD SDI 2 AUDIO Compatible signal formats: 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/24pSF Output terminal for a selected component serial digital signal Output terminal for s selected digital signal (the input...
-
Page 8: Preparation
(on the rear side of the monitor) in which you are going to install the card. Slot cover Rear side of the DT-V1700CG multi-format monitor 3. Insert the Input Card’s board (green- coloured) into the slot, fitting the board into the guide rails on the top and bottom of the slot. -
Page 9: Basic Menu Operations (Main Menu, Setup Menu)
BASIC MENU OPERATIONS (MAIN MENU, SETUP MENU) ABOUT MENU SCREENS This monitor features a MAIN MENU (main menu screen) and a SETUP MENU (setup menu screen). The MAIN MENU contains the functions normally used, and the SETUP MENU contains the settings required for initial setup. -
Page 10: How To Use "Main Menu
HOW TO USE “MAIN MENU” “MAIN MENU” ITEMS The following items appear in MAIN MENU. Items Functions APERTURE CONTROL Compensates the frequency characteristics of the input video signal. SLOT CONDITION Displays the status of the input cards installed in each of the input card slots. sub menu POSITION Selects the display position of the sub menu superimposed on the screen. - Page 11 ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS 1. APERTURE CONTROL Compensates the frequency characteristics of the input video signal. Press the button to display the setting menu illustrated on the right. NOTE : APERTURE CONTROL is not displayed when the RGB signal is input. Item : LEVEL Adjustment...
- Page 12 5. AREA MARKER-R Items : Selects the size marker for the other screen ratio (aspect) used when the screen ratio is 16:9. (for external control) Settings : OFF/4:3/16:9/14:9/13:9/MODE 1/MODE 2 Functions : OFF: The marker is not displayed. 4:3/16:9/14:9/13:9: Displays the marker (a white quadrangle) showing the screen size of each aspect ratio.
-
Page 13: How To Use "Setup Menu
HOW TO USE “SETUP MENU” “SETUP MENU” ITEMS Items Functions 1 FUNCTION SETTING Displays the monitor’s power-up time or the total usage time. 2 PICTURE SUB ADJ. Performs approximate adjustments using the control knobs on the front panel. 3 COLOR TEMP./BAL. Sets or adjusts the colour temperature or white balance. - Page 14 HOW TO USE “SETUP MENU” ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS 1. FUNCTION SETTING Selects the colour system and displays the monitor’s power- up time or the total usage time. Press the button to display the setting menu illustrated on the right. Item : COLOR SYSTEM Settings...
- Page 15 3. COLOR TEMP./BAL. Sets or adjusts the colour temperature or white balance. Press the button to display the setting menu illustrated on the right. Item : COLOR TEMP. Settings : HIGH/LOW Function : Selects the colour temperature. HIGH : Sets the colour temperature to D9300. LOW : Sets the colour temperature to D6500.
- Page 16 5. DISTORTION ADJ. Compensates the picture distortion. Press the button to display the setting menu illustrated on the right. Item : PINCUSHION Adjustment range : –20 ~ 00 ~ +20 Function : Compensates pincushion picture distortion. – : Expands both left and right sides of the picture.
-
Page 17: How To Use External Control
HOW TO USE EXTERNAL CONTROL ABOUT EXTERNAL CONTROL This multi-format monitor has two external control terminals. One is the MAKE terminal, which controls the monitor by connecting the terminals with many functions to the ground (GND) terminal. The other is the RS-232C terminal, which allows the monitor to be controlled by a PC via serial communication. - Page 18 HOW TO USE EXTERNAL CONTROL HOW TO USE THE RS-232C TERMINAL You can control the monitor from your PC via the RS-232C terminal. For details on operating the monitor from the PC, consult your dealer or service centre for details. 1.
-
Page 19: Troubleshooting
TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult a JVC-authorised dealer or service centre for assistance. Problems Points to be checked... - Page 20 TROUBLESHOOTING Problems Points to be checked Irregular colour Is the monitor placed or moved close to a speaker or any other device incorporating a magnet? Has the position of the monitor been changed with the power on? Wrong picture Has the picture position, size or position, wrong distortion been changed? picture size...
-
Page 21: Specifications
SPECIFICATIONS Type : Multi-format monitor Picture Tube : 17" measured diagonally Effective Screen Size : Width : 330 mm Height : 250 mm Diagonal : 410 mm Scanning Frequency : H : 15 kHz/15 kHz – 45 kHz V : 50 Hz – 100 Hz Video Band : Component : 25 MHz (–3 dB) Video (Y/C) : 8 MHz (–3 dB) - Page 22 Compliant Signal Formats of Each Input Card Input Signals NTSC (3.58 MHz) PAL (4.43 MHz) Black-and-White (50 Hz/60 Hz) 480/60i (525i) 480/60p (525p) 576/50i 576/50p (*1) 720/60p (720p) 1080/50i (*1) 1080/60i (1125i) 1035/60i (1125i) (*1) 1080/24pSF : Input possible. Pre-set. : Input possible.
- Page 23 SPECIFICATIONS (INPUT CARD: OPTIONAL) IF-C01COMG: COMPONENT/RGB INPUT CARD Type : Component/RGB input card for multi-format monitor Inputs/Outputs : Component (Y, P (Y: 1 V (p-p), 75 /P Synchronised signal (HD/C * The input (IN) and output (OUT) terminals are bridge-connected. Auto termination. Audio signal : 1 line (monaural), RCA pin x 2 (0.5 V (rms), high impedance) * The input (IN) and output (OUT) terminals are bridge-connected.
- Page 24 JVC PROFESSIONAL PRODUCTS COMPANY DIVISION OF US JVC CORP. 1700 Valley Road Wayne, N.J. 07470 JVC CANADA INC. 21 Finchdene Square, Scarborough Ontario M1X 1A7 Printed in Japan LCT0971-002A © 2001 VICTOR COMPANY OF JAPAN, LIMITED 0701-I-U-VP...