Controls And Features - JVC DT-V2000SU Service Manual

•
•
•
•
•
4
DT-V2000SU
I
CONTROLS AND FEATURES
FRONT VIEW-------------
<Front Panel>
7
[!]speaker
A built-in speaker is located in the right panel when the
monitor is viewed from the front.
[[]MENU button
Displays and turns off the menu screens.
( Notes: )
• There are two menu screens: the <MAIN MENU>
screen and the <SET-UP MENU> screen.
• To display the <MAIN MENU> screen, press the MENU
button.
• To display the <SET-UP MENU> screen, when no menu
screen is displayed, press the VOLUME/ENTER (-)
button while pressing the SELECT (T) button.
• To select an item in a menu screen, press the SELECT
(T) button .
• To set or adjust a selected item in a menu screen, press
the VOLUME/ENTER(-/+) buttons.
[I]sELECT (T) button
Selects an item in a menu screen. Each time the SELECT
button is pressed, the selection mark moves to the next
item below.
II]
POWER switch/POWER indicator
Monitor power switch and power indicator. Press the
POWER switch to turn the power ON or OFF.
* When the monitor is ON, there is a slight delay before
the picture appears while the monitor runs a self-test.
No.51519B
6
5
(IIINPUT SELECT buttons
Select the video signal input to each terminal.
■
Input A button [INPUT A (RGB/COMPO.)]
Q)
..._____r-"'1
-ON
~ &OFF
POWER
Selects the video signal input to the INPUT A (RGB/
COMPO.) terminal. When selected, the INPUT A
indicator lights in green .
■
Input 8 button [INPUT 8 (VIDEO)]
Selects the video signal input to the INPUT B (VIDEO)
terminal. When selected, the INPUT B indicator lights
in green.
■ Input C button [INPUT C (RGB)]
Selects the video signal input to the INPUT C (RGB)
terminal. When selected, the INPUT C indicator lights
in green.
[!)VOLUME/ENTER(-/+) buttons
Adjust the speaker volume. Also used to set or adjust an
item in a menu screen.
[[]Picture adjustment knobs
Adjust the picture hue (PHASE), chroma (CHROMA),
brightness (BRIGHT) and contrast (CONTRAST).
*
For details, refer to page 9.
1-3