JVC DT-V1710CG Instructions Manual page 14

How to Use MAIN MENU
sub menu POSI.
Selects the display position of the sub menu
superimposed on the screen.
☞ "To change the positions of the sub-menu display" on
page 12
AREA MARKER
NOTES:
• For the 4:3 screen ratio, only SAFETY MARKER and R-
SAFETY MARKER are displayed.
• To set up non-"R-" items, press the AREA MARKER button
on the front panel. An external control system should not
be operated at this time.
• Using the external control, you can select either "R-" items
or non-"R-" items to activate.
☞ "How to Use the External Control" on pages 21 and 22
7 MARKER SELECT/R-MARKER SELECT
It displays the area of the aspect ratio that has been
set in the ASPECT SELECT/R-ASPECT SELECT,
superimposed on the current screen.
OFF: MARKER SELECT does not function.
LINE: Displays the area with an outline.
HALF: The area outside the specified screen ratio is
displayed as a 50% transparency.
HALF+L: The area of the specified screen ratio is
indicated by an outline, and the area outside
of that is displayed as a 50% transparency.
BLK.: The area outside the specified screen ratio is
black. Only the portion of the picture within
the designated area is displayed.
BLK. +L: The area of the specified screen ratio is
indicated by an outline, and the area outside
of that becomes black so that only the area
inside the line is displayed.
NOTE:
• When RGB signal is input, "HALF" and "HALF+L" are
not displayed.
7 ZOOM/R-ZOOM
Zooms the centre of the marked area.
• OFF/ON
NOTES:
• Does not function when under-scan is operated.
• To adjust the zoomed picture size, ☞ "ZOOM H. SIZE"
and "ZOOM V. SIZE" on page 18.
7 ASPECT SELECT/R-ASPECT SELECT
Selects the aspect ratio.
• 4:3/13:9/14:9
14
Controls ON/OFF and other
settings of the MARKER
SELECT, ZOOM, ASPECT
SELECT, and SAFETY
MARKER functions
included in the AREA
MARKER function.
(cont.)
7 SAFETY MARKER/R-SAFETY MARKER
Displays dotted lines to indicate the areas
corresponding to 80%, 88%, or 90% of the screen
size (the aspect ratio setting in "ASPECT SELECT/
R-ASPECT SELECT").
• OFF/80%/88%/90%
NOTES:
• When a picture of 4:3 aspect ratio is input, SAFETY
MARKER for 4:3 screen is displayed.
• To display SAFETY MARKER for 16:9 screen ratio
when a picture of 16:9 aspect ratio is input, set
"MARKER SELECT/R-MARKER SELECT" to "OFF." (In
this case, setting of ASPECT SELECT is invalid.)
COLOR MATRIX
• The standard setting is set to "ITU601" or "ITU709"
depending on the input signal format.
The factory preset of MANUAL is ITU709.
Input Signal Format
NTSC, PAL, 480/60i, 480/60p,
576/50i, 576/50p
720/50p, 720/60p, 1080/60i,
1035/60i, 1080/50i, 1080/24psF
7 SELECT
Selects the picture matrix standard.
ITU601 or ITU709: Standard setting
MANUAL: Manual setting
The following items are displayed when MANUAL is
selected.
7 R-Y PHASE
Sets the R-Y phase.
• 90/92/94/112
7 R/B GAIN
Sets the R/B gain.
• 0.56/0.68/0.79/0.86
7 G-Y PHASE
Sets the G-Y phase.
• 236/240/244/253
7 G/B GAIN
Sets the G/B gain.
• 0.30/0.34/0.40/0.45
NOTE:
• Adjustment value of each item in the standard setting
(ITU601/ITU709) is as follows:
ITU601
R-Y PHASE 90
R/B GAIN 0.79
G-Y PHASE 244
G/B GAIN 0.45
Selects or adjusts the
standard of the color
demodulation (color
rendering).
Ex.: The menu screen when
MANUAL is selected.
Standard Manual setting
setting (MANUAL)
ITU601
ITU709
ITU709
ITU709
90
0.86
244
0.30