Controls And Features - JVC TM-A170G Operating Instructions Manual

CONTROLS AND FEATURES

FRONT VIEW
<Front Panel>
CHROMA CONTRAST VOLUME/SELECT
9
PHASE BRIGHT
50C
1 2 3
POWER
CHROMA CONTRAST VOLUME/SELECT MENU A B
PHASE BRIGHT INPUT SELECT
TM-A170
1 Chroma/Phase button
[ CHROMA/ PHASE]
Press this button to activate the picture color density
adjustment mode or picture hue adjustment mode. Each
time you press the button, the adjustment item changes.
Picture color density Picture hue
f
Adjust the value with the VOLUME/SELECT buttons
Also used as a control button in the menu function mode.
2 Contrast/Brightness button
[CONTRAST / BRIGHT ]
Press this button to activate the picture contrast adjust-
ment mode or picture brightness adjustment mode. Each
time you press the button, the adjustment item changes.
Picture contrast f Picture brightness
Adjust the value with the VOLUME/SELECT buttons
Also used as a control button in the menu function mode.
3 Volume/Select buttons
[VOLUME/SELECT – +]
Adjusts the speaker volume. Also used as a control
button in the menu function mode.
4 Menu button [MENU]
Displays and disappears the <MENU> screen.
1
Pressing the CHROMA/PHASE button with the Menu
button depressed will display the <SET-UP MENU>
screen.
5 Input A (VIDEO) button [INPUT SELECT A]
Selects the video and audio signals input to the VIDEO A
! $
and AUDIO A terminals on the rear panel. The
button lights when selected.
4
MENU
A B
INPUT SELECT
4 5 6
Input B (VIDEO Y/C) button [INPUT SELECT B]
6
Selects the video and audio signals input to the VIDEO B
@ # %
or VIDEO B (Y/C) and AUDIO B terminals on
the rear panel. The button lights when selected.
Note:
● The VIDEO B terminals include a video terminal (BNC
3
.
connector) and a Y/C terminal (mini-DIN 4-pin connec-
tor). The Y/C (S-video) terminal has priority.
7 Power indicator
Unlit : The main power is OFF.
Orange : The main power is ON, but the monitor's power
is OFF (in the stand-by mode).
Green : The main power is ON, and the monitor's power
is ON (in the normal operation mode).
Power switch [POWER ]
8
3
.
Press the power switch to turn the monitor's power ON or
OFF when the main power is ON.
9 Speaker
A built-in speaker is located inside the right side panel
when the monitor is viewed from the front.
REAR VIEW
<Rear Panel>
VIDEO A
11
POWER
VIDEO B
12
7 8
13
OUT
AUDIO A
14
AUDIO B
15
External control terminal [REMOTE]
10
Remote terminal for external control.
The input signal (the INPUT function) or the aspect ratio
(the ASPECT RATIO function) can be selected by
external control using a switch cable. Setting of the
INPUT REMOTE or ASPECT REMOTE item in the <SET-
UP MENU> screen is required before using external
control.
Refer to the HOW TO USE EXTERNAL CONTROL on
page 14 for more details.
11
Video A terminals [VIDEO A IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN : Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
* For corresponding audio signals, use the AUDIO A
$
terminals .
* Also refer to BASIC CONNECTION EXAMPLE
on page 12.
12 Video B terminals [VIDEO B IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN : Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
* For corresponding audio signals, use the AUDIO B
%
terminals .
* Also refer to BASIC CONNECTION EXAMPLE on
page 12.
13 Video B (Y/C) terminals [VIDEO B Y/C IN/OUT]
Y/C (S-video) signal input (IN) and output (OUT) termi-
nals. The output terminal is bridge-connected.
IN
: Y/C-separated (S-video) video signal input
terminal
OUT : Bridge-connected Y/C-separated (S-video) signal
output terminal.
IN OUT REMOTE
10
IN OUT
VIDEO A
IN OUT
VIDEO B
IN OUT
IN Y/C
IN Y/C
OUT
AUDIO A
IN OUT
AUDIO B
IN OUT
OUT
IN
IN OUT
Notes:
* For corresponding audio signals, use the AUDIO B
%
terminals .
* When both VIDEO B terminals are connected (input) at
the same time, the Y/C terminal has priority.
* Also refer to BASIC CONNECTION EXAMPLE
on page 13.
Audio A terminals [AUDIO A IN/OUT]
14
Input (IN) and output (OUT) terminals for the audio signal
corresponding to the VIDEO A terminals
The output terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO A
!
terminal .
* Also refer to BASIC CONNECTION EXAMPLE
on page 12.
15 Audio B terminals [AUDIO B IN/OUT]
Input (IN) and output (OUT) terminals for the audio
signals corresponding to the VIDEO B terminals
#
VIDEO B (Y/C) .
The output terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO B
@
terminals or VIDEO B (Y/C) terminals
* Also refer to BASIC CONNECTION EXAMPLE
on pages 12 and 13.
!
.
@
#
.
5