Thermo Scientific Nanopure Analytical 1367 Series Operating Manual And Parts List page 30

System Cleaning
Procedure (cont.)
Thermo Scientific
18. Remove the protective cap from the filter bell. Turn the dispense knob
to the left or right and flush 1-2 liters of water through the 0.2 micron
filter. The product water is now ready for use.
Note For more demanding applications where low TOC water is required,
a rinse of 15-20 liters through the cartridges and 0.2 micron filter may be
necessary.
s
Caution Never dispense water without first installing hose barb provided in
parts bag or final filter supplied with cartridge pack.
Figure 7-3. Installing 0.2 Micron Filter
0.2 Micron
Filter
Section 7
Initial Operation
s
Nanopure™ Analytical 7-5