Thermo Scientific Nanopure Analytical 1367 Series Operating Manual And Parts List page 13

Section 3
General Specifications
3-2 Nanopure™ Analytical
Electrical Requirements
The Nanopure Analytical is equipped with 2 power cords to be plugged
into an electrical outlet of the appropriate voltage.
U.K. customers use cord, CRX100 and fuses for 240V installation.
Model D11901 . . . . .100-240 VAC, 100 watts, 47-63 Hz, 1 phase
Environmental Conditions
Operating: . . . . . .4°C - 40°C; 20% to 80% RH, non-condensing.
Installation Category II (over-voltage) in accordance with IEC 664.
Pollution Degree 2 in accordance with IEC 664.
Altitude limit: . . . . . . . . . . . . . . . . . . .3,500 meters.
Storage: . . . . . .-25°C to 65°C; 10% to 85% relative humidity (RH).
Declaration of Conformity
We hereby declare under our sole responsibility that this product conforms
with the technical requirements of the following standards:
EMC:
EN 61000-3-2 Limits for Harmonic Current Emissions
EN 61000-3-3 Limits for Voltage Fluctuations and Flicker
EN 61326-1 Electrical Equipment for Measurement, Control, and
Laboratory Use; Part I: General Requirements
Safety:
EN 61010-1 Safety Requirements for Electrical Equipment for
Measurement, Control and Laboratory Use; Part I: General
Requirements
per the provisions of the Electromagnetic Compatibility Directive
2004/108/EC, and per the provisions of the Low Voltage Directive
2006/95/EC.
Copies of the Declaration of Conformity are available upon request.
Thermo Scientific