Status - Graco HydroShield WABH00 Instructions - Parts Manual

Status

Status Status Screen Screen 2 2 2 Screen
Status screen 2 displays the current status of the
solenoids that drive activity for the color change
valves.
The screen lists the solenoid valve number and the
function of the valve. A checked box indicates that
the solenoid is activated.
Solenoid Valve Solenoid Solenoid Valve Valve Description Description Description
/ / / Function Function
Function
1 / Air Solenoid 1 controls the air valve
(default).
10 / Flush Solenoid 10 controls the flush
valve (default).
2 / Dump Solenoid 2 controls the dump
valve (default).
Valves 3–9 and Solenoids 3–9 and 11–18 control
11–18 / Color 1 valves for color material 1–15.
through 15
3A8492A
Status Screen Status Status Screen 3 3 3 Screen
Status screen 3 displays the inputs and outputs
related to automatic system operation.
Inputs
Inputs Inputs
Inputs are signals that the system acts on. When the
status circle next to the input appears yellow, the
sensor is activated.
ES Request: Request: External pneumatic and electrical
• ES ES Request:
signal that tells the system the use of electrostatics
is desired.
Paint Trigger: Trigger: External pneumatic input that tells
• Paint Paint Trigger:
the system the gun is triggered.
Outputs Outputs Outputs
Outputs are signals the system sends out to drive
other actions.
• ES ES Enable: ES Enable: External pneumatic and electrical Enable:
signal that is sent to a voltage controller to turn on
electrostatics.
Low Paint: Paint: Electrical signal that closes the contacts
• Low Low Paint:
in an optocoupler when the internal paint supply is
low and is disabled when the paint supply is full.
Run Menus
51