Ferro GPA II Installation And Operation Manual page 65

WARRANTY CONDITIONS
1. FERRO S.A. company provides a 24-month warranty for a correct operation
of the Ferro pump in agreement with its application and technical conditions
specified in the Instruction Manual, and 6-month warranty for repairs and used
spareparts. Warranty period starts on the final user purchase date. Warranty
applies on the territory of Poland, for other countries seller is responsible for
any warranty certificates.
2. The warranty certificate must be completed and stamped by the seller and the
installation company which installed the pump; an incomplete warranty certifi-
cate is invalid.
3. The seller is obliged to show the product when selling it; potential later claims
regarding surface damage will not be accepted.
4. The customer will make a legitimate claim in the organization where he has
bought the product or directly in the FERRO S.A. company. In case of a claim,
he will submit a duly completed Warranty Certificate together with a purchase
receipt; the claim will not be accepted unless valid documents are submitted.
5. The warranty covers only flaws provably caused by the manufacturer, not by
incorrect or incompetent installation, a failure to satisfy all instructions speci-
fied in the User's Manual, flaws caused by impurities in the distribution system,
freezing, mechanical damages etc.
6. The warranty does not cover damages caused during transport, unsuitable stor-
age or improper usage of the product.
7. The warranty does not cover parts that are subject to natural wear caused by
standard application as well as all faults caused by dirts carried by pumped liq-
uid. Usage of proper filter at the pump's inlet is mandatory.
8. The warranty cannot be accepted after any unauthorized interference with the
product.
WARRANTY CERTIFICATE
EN