Ferro GPA II Installation And Operation Manual page 50

EN
NOTES ON APPLICATION FOR GPA II SERIES:
1. Read the installation manual carefully before installation and use
2. The manufacturer will not be liable for any personal injury, pump damage and
other property caused by non-compliance with the safety warning signs.
3. Installers and operators must comply with local safety regulations.
4. The user must make sure that this product is installed and maintained only by
qualified personnel with professional certification and knowledge of this manual
5. The pump must not be installed in a damp location, exposed to water splash.
6. For convenient access for maintenance purposes, a shut-off valve shall be in-
stalled on each side of the pump.
7. Shut off power supply to the pump before installation and maintenance.
8. Heat supply pipelines shall not be frequently filled with non-softened water so as
to avoid increasing calcium in the circulating water inside the pipeline levels as it
may block the impeller.
9. Do not start the pump without liquid.
10. The medium may be high-temperature and high pressure; therefore, the system
must be completely drained or the shut-off valves on both sides must be closed
before moving and dismantling the pump to prevent burning.
11. If you remove the plug, high temperature and high-pressure liquid will be dis-
charged. Therefore, make sure that the outflow does not cause personal injury
or damage to other parts.
12. Ventilation must be ensured in summer or high ambient temperature period to
avoid condensation that may cause electrical malfunctions.
13. In winter or when the ambient temperature drops below 0°C, the pump system
will not work and should be completely drained so as to avoid frost cracking of
pump body.
14. If the pump is left idle for a long time, close the pipe valve at pump inlet and outlet
of the pump and cut off power supply.
15. If the flexible cord is damaged, it must be replaced by a qualified person.
16. Close the valve at the inlet of the pump and cut off pump power supply immediate-
ly in case of overheating or if any other abnormality is detected in the motor, then
contact your vendor or service center immediately.
17. If you cannot resolve any problem acc. to the manual, close the valves at the inlet
and outlet of the pump immediately, cut off power supply and contact your vendor
or service center immediately.
18. Keep the product out of the reach of children. After installation, isolate accord-
ingly to prevent access of children.
19. Store the product in a dry, well ventilated and cool place under room temperature.
20. This appliance can be used by children aged 8+ and by above and persons with
physical, sensory or mental impairments or lack of experience and knowledge
provided that they are given supervision or instruction concerning safe use of the
appliance and that they understand the hazards involved. Children must not play
with the appliance. Children are not allowed to clean the product or carry out user
maintenance.