Ferro GPA II Installation And Operation Manual page 55

5. GPA II ELECTRICAL CONNECTION
Max. 1.5mm
2
12mm
Min. Ø 5.5mm
Min. Ø 5.5mm
Max. Ø 10mm
Max. Ø 10mm
Electrical connection and pro-
tection should be provided in ac-
cordance with local regulations.
WARNING:
!
The pump must be connected with
earth wire.
The pump must be connected with
an external switch, electrodes
spaced at are 3 mm minimum.
• GPA-II series motor pump does
not require external protection.
• Verify the supply voltage and fre-
quency with the nameplate data.
• Connect the pump to mains us-
ing the supplied plug and appro-
priate cable (not supplied).
• Indicator light on the control
panel shows that the device is
powered up.
Max. 1.5mm
Max. 1.5mm
7mm
12mm
12mm
1
4
2
2
7mm
7mm
2
5
+6%
1x230 V
-10%
7
3
6
~,50/60 Hz
8
EN