Ferro GPA II Installation And Operation Manual page 54

EN
WARNING: The pumped medium may be high temperature and high
!
pressure. Before removing the hex screws, drain the system or shut off
the valves on the two sides of the pump.
After changing the position of junction box, the pump after refilling the
Caution
system or opening the valves on the two sides of the pump.
4.4. Heat Insulation of Pump Body
Note
Caution
1
4
Monitor heat intake of pump body and pipeline Insulate pump body
and pipeline to reduce heat consumption
Do not insulate or cover the junction box or the control panel
2
5
3