Mercedes-Benz GLS Owner's Manual page 47

44
Occupant safety
Press and hold the seat belt outlet release
#
and slide seat belt outlet 3
position.
Let go of the seat belt outlet release and
#
ensure that seat belt outlet
position.
% A seat belt can only provide the best level of
protection if it is worn correctly. Observe the
notes on fastening the seat belt
( page 41).
/
* NOTE Deployment of the seat belt ten‐
sioner and side impact airbag when the
front passenger seat is unoccupied
If the seat belt tongue is engaged in the seat
belt buckle of the unoccupied front
passenger seat, the seat belt tensioner and
the side impact airbag may also deploy in the
event of an accident along with other sys‐
tems.
Only one person should use each seat
#
belt at any one time.
Seat belt adjustment function
into the desired
Vehicles with PRE-SAFE
belt has been fastened, the automatic seat belt
adjustment may apply a certain tightening force.
3 locks into
Do not hold the seat belt tightly while it is
adjusting.
You can activate and deactivate the seat belt
adjustment function using the multimedia sys‐
tem ( page 44).
/
Activating/deactivating seat belt adjustment
via the multimedia system
Multimedia system:
©
4
Activate or deactivate
#
Releasing seat belts
Press the release button in the seat belt
#
buckle and guide the seat belt back with the
seat belt tongue.
®
: after a front seat
Settings Vehicle
5 5
Belt adjustment.
Seat belt warning function for the driver and
front passenger
The ü seat belt warning lamp in the instru‐
ment display is a reminder that all vehicle occu‐
pants must wear their seat belts correctly.
In addition, a warning tone may sound.
As soon as the driver and front passenger fasten
their seat belts, the seat belt warning goes out.
Function of the rear seat belt status display
The rear seat belt status display is only available
for certain countries.