Mercedes-Benz GLS Owner's Manual page 124

Head restraint of the standard vehicle (example)
To adjust the side bolsters of the head
#
restraint: pull or push right or left-hand side
bolster 1.
To adjust the angle of the head restraint:
#
pull or push the head restraint in the direc‐
tion of arrow 2.
Attaching and removing the additional cush‐
ion of the luxury head restraint in the rear
compartment
Use the additional cushion only when the vehicle
is stationary. The additional cushion is in the
vehicle.
Position the head restraint as far forwards as
#
possible.
To attach the additional cushion: hold
#
additional cushion 1 against the head
restraint and push press studs
counterpieces.
To remove the additional cushion: release
#
press studs 2 and remove additional cush‐
ion 1.
Configuring the seat settings
Multimedia system:
©
4
Adjusting the backrest contour in the lumbar
region of the seat backrest (lumbar)
Select Lumbar.
#
Select the settings Z for the desired seat.
#
Adjust the air cushions.
#
Adjusting the backrest side bolsters
Select Side
#
Adjust the air cushion for the desired seat.
#
Setting the seat heating balance
Select Seat heating
#
Adjust the heat distribution for the desired
#
seat.
2 into the
Seats and stowing 121
Comfort Seat comfort
5 5
bolsters.
balance.