Mercedes-Benz GLS Owner's Manual page 420

* NOTE Vehicle damage from the jack
If you do not position the jack correctly at
the appropriate jack support point of the
vehicle, the jack could tip over with the vehi‐
cle raised.
The jack is designed exclusively for
#
jacking up the vehicle at the jack sup‐
port points.
Take the ratchet ring spanner out of the tyre-
#
change tool kit and place it on the hexagon
nut of the jack so that the letters "AUF" are
visible.
Position support 2 of jack
#
port point 1.
Turn ratchet ring spanner 3
#
jack support 2 sits completely on jacking
point 1 and the base of the jack lies evenly
on the ground.
Continue to turn ratchet ring spanner
#
until the tyre is raised a maximum of 3 cm
off the ground.
Loosen and remove the wheel (
#
Mercedes-Maybach vehicles:
4 on jack sup‐
clockwise until
Requirements:
The running boards are retracted
R
( page 88)
/
3
The stone chipping protective covers are
R
removed (
Wheels and tyres 417
page 418).
/
page 414)
/