Mercedes-Benz GLS Owner's Manual page 458

Vehicle
Display messages
Update successfully com-
pleted
Update failed Software
remains unchanged
Update failed
d
Vehicle is operational
Switch off ignition before
exiting
ï
Operation only possible in
transmission position P
Possible causes/consequences and
* Installation of the software update has been successfully completed (
* An error occurred during installation of the software update (
The previous software release remains in place.
* An error occurred during installation of the software update (
Make a Mercedes me call via the overhead control panel (
* You are leaving the vehicle in a ready-to-drive state.
When you leave the vehicle, switch off the ignition, secure the vehicle against rolling away and take the key with
#
you.
If you do not leave the vehicle, switch off the electrical consumers, e.g. the seat heating. Otherwise, the 12‑V
#
battery may discharge and starting the engine may be possible only with the help of a second battery (jump
start).
* The ball neck will not swivel because transmission position h, k or neutral i is selected.
Depress the brake pedal.
#
Engage park position j.
#
Display messages and warning/indicator lamps 455
M M Solutions
page 327).
/
page 327).
/
page 344).
/
page 327).
/