Table of Contents
Advertisement
Optional Cover Presser Feet
•
Cording Foot
–
This presser foot guides decorative and fine
cords of up to 2 mm thickness exactly and
precisely below the coverstitch seam as they
are being sewn on. Alternatively, it can also be
used to create and insert piping.
•
Standard Presser Foot with clear sole
–
The clear sole affords the perfect view of your
sewing project. It is ideal for decorative seams
which have been previously tailor-tacked, as
well as for positioning at the beginning or end of
a seam.
•
Hemmer and Lace Foot
–
This presser foot sews tapes or lace below a
fabric edge, which is simultaneously folded to
form a hem. A coverstitch neatens both edges
at the same time, whilst the material is folded by
1 cm.
•
Binder Attachment for unfolded bias tape
–
The binder attachment creates practical edge
finishes with unfolded bias tape in a width of 25
to 28 mm. Self-cut bias tape can also be used
for a professional look.
•
Hemmer Foot
–
The hemmer foot quickly and easily sews even
seams with a depth of 2.5 cm. A narrow or wide
coverstitch can be used to neaten the cut edge.
•
Belt-loop Foot
–
The belt-loop foot is used to fold bias or straight
binding, which it then quickly and easily turns
into straps or belt loops with the cover- or
chainstitch.
•
Lace Foot
–
For sewing lace, trim and tapes onto hems. The
bottom edge of the fabric is simultaneously
neatened with a narrow or wide coverstitch,
creating a flat joining seam.
71
Hide quick links:
Advertisement
Table of Contents
